ce kbp005 thru kbp10 chenyi electronics single phase glass bridge rectifier voltage: 50 to 1000v current:2.0a features ideal for printed circuit board surge overload rating: 60a peak high case dielectric strength mechanical data . terminal : plated leads solderable per mil-std 202e, method 208c . case : ul-94 class v-0 recognized flame retardant epoxy . polarity : polarity symbol marked on body . mounting position : any maximum ratings and electrical characteristics (single-phase, half-wave, 60hz, resistive or inductive load rating at 25 , unless otherwise stated, for capacitive load, derate current by 20%) symbol kbp005 kbp01 kbp02 kbp04 KBP06 kbp08 kbp10 units maximum recurrent peak reverse voltage vrrm 50 100 200 400 600 800 1000 v maximum rms voltage vrms 35 70 140 280 420 560 700 v maximum dc blocking voltage vdc 50 100 200 400 600 800 1000 v maximum average forward rectified current at ta=50 if(av) a peak forward surge current 8.3ms single half sine-wave superimposed on rated load ifsm a maximum instantaneous forward voltage at forward current 2.0a dc vf v maximum dc reverse voltage ta=25 a at rated dc blocking voltage ta=100 ir m a operating temperature range tj storage and operation junction temperature tstg 1.0 -55 to +125 -55 to +150 2.0 50 1.1 10.0 copyright @ 2000 shanghai chenyi electronics co.,ltd page 1 of 2
ce kbp005 thru kbp10 chenyi electronics single phase glass bridge rectifier voltage: 50 to 1000v current:2.0a ratings and characteristic curves kbp005 thru kbp10 fig.1-maximum non-repetitive forward fig.2-typical forward current surge current derating curve fig.3-typical instantaneous forward characteristics fig.4-typical reverse copyright @ 2000 shanghai chenyi electronics co.,ltd page 2 of 2
|